|Handy Well Pump Parts and Accessories
Handy Well Pump Well Seals
Designed to allow more than one pipe through the opening. There are three openings in the well seal. 1,1-1/4 " pipe opening for The Handy Well Pump, 1, 1" pipe opening for your existing pump and 1, 1/2" threaded opening. Please check your current configuration before ordering.
This pressure tank is designed to equalize the flow of water during a pump stroke so that there is a constant stream of water while you pump. Take a shower, fill a toilet or fill the kitchen sink through your house waterlines by using The Handy Well Pump and this pressure tank.
Just connect a garden hose from the pump to the tank and a garden hose from the tank to your water system in your house. Start pumping while Mom takes a shower.
Handy Well Pump Extension Kits
Extension sets are available to increase the length of your pump system. Each set is 20' consisting of 4- 5' sections of both outer extension pipe and inner riser pipe.
All of our components are designed to fit in well casings as small as 2".
3/4" Foot Valve
Pump Support Bracket
The pump Support Bracket is used to secure the well pipe above the well seal in deep wells. A useful item if there is a lot of weight from water in the pipe.
NOTE: A pump support bracket is now incorporated into the handle assembly of ALL Handy Well Pumps. This item is still useful if you need to secure a pump from uplift such as when a metal well cap is modified with a hole to accept our pump.
Threaded Adapter Fitting Set
Enough adapters to do one section of 1 1/4" pipe and one section of 1/2" pipe in a length that is suitable for your needs.
These are the same fittings that we use on our extension sets and will work in a 2" or larger casing.
Special inside Adapter Fitting Set
These inside fittings are used for those tight places when a standard threaded fitting won't work. Such as getting by a narrow opening in a 4" well casing created by the use of a pitless adapter. They are designed to go on the inside of the pipe.
These are a glue fitting and should dry overnight before lowering into the well.